The National Trust Organization - 837 Words

Introduction The national trust was founded in 1895. It protects over 350 historic houses, gardens and ancient monuments. This organisation is a charity which does not rely funds from government but depends on membership fees and donations from members. Were a charity that works to preserve and protect historic places and spaces – for ever, for everyone. (National trust 2013) This report will be based on an analysis of the national trust organisation, the external audit will be examined using the pestle analysis and porters 5 forces, whilst the internal audit will be interpreted by engaging with the marketing mix. Furthermore the report will also include a swot analysis and recognise the target market of the national trust organisation.†¦show more content†¦In terms of health and safety the national trust organisation has very close links with Swindon borough and the health and safety executive (HSE). However customers who visit these sites are responsible for their own safety. But the charity avoids restriction on access from peoples enjoyment and freedom The charity will aim to reduce their fossil fuels for heat and electricity by 50% by 2020, in order to this they will be conserving energy, growing their own electricity and heart, getting off oil and energy inspiration. National trust has no competition because they are unique in what they do and what they have offer to the public Porters 5 forces The Porters Five Forces tool is a quick and effective tool for understanding where the main control lies within the company. This is useful, because it helps you recognise the strength of your competitive position, and the strength of a positionShow MoreRelatedEssay on Mowak National Bank1168 Words   |  5 PagesMOHAWK NATIONAL BANK Question 1: How do you implement change in a bank? In a traditional organization of Mohawk National Bank, the main problem is that there is no communication and cooperation between departments due to absence of a project manager, who could act as focal point for the integration work. For solving their problem Mohawk National Bank is thinking to consider a new organizational structure: matrix organization. The main obstacle of this project is the hostility at change ofRead MoreEssay on What ´s Historic Preservation?1026 Words   |  5 Pagescompletely rebuild and replicate it on the site. Yet the three forms of Preservation, Restoration, and Reconstruction cannot stand along without the schools of thought that have been made based around them. The many interesting schools of thought and organizations that work to save each historic site are so different, yet have the same thing in mind, the preservation of pieces of history that if lost, will be only a memory. These schools of thought include those of individuals such as Eugene Emmanuel Viollete-le-DucRead MoreThe National Trust For Historic Preservation Essay700 Words   |  3 Pages1 â€Å"How does the case of the National Trust for Historic Preservation reflect the concept of resource dependence discussed in this chapter? How does it reflect the interaction between sources of revenue and priorities?† In the case of the National Trust for Historical Preservation (this will be referred to in the future as NTHP in this paper), the concept is reflected in their decision to break away from government funding. Because Congress had designated them as a trust, they had a large portion ofRead More Codes of Ethics in Health Care Essay995 Words   |  4 PagesEthical Codes are in use today by many organizations to clearly establish their values and provide a procedure if a code violation occurs. Medical ethics began as a professional code for physicians and has now expanded and includes a variety of health care professions and health care organizations. The growth of medical knowledge and technology have grown so have the concerns that ethical standards and issues facing our society today may be compromised or not appropriately addressed (LittletonRead MoreProposed Solutions for Problems with the Federal Governments Management of Their Land 998 Words   |  4 PagesThe Federal Governmen t owns nearly â€Å"30 percent† of the United States land mass- almost â€Å"650 million acres of land† (Paul, 2012). National parks, National Forests, and National Wildlife Refuges comprise the federally owned and managed public areas. These areas are managed by three main entities: â€Å"The National Park Service (NPS), The Bureau of Land Management (BLM), and the Fish and Wildlife Service (FWS)† (Edwards, 2012). The primary goal of these three agencies is to avoid the tragedy of the commonsRead MoreTourism in Perspective Essays870 Words   |  4 Pagescolleges and universities from around the globe, I think there is lot of scope of travel and tourism courses, it has scope in many foreign countries, which could help offer employment and create jobs in travel agencies, hotels, airlines and govt. organizations dealing with tourism, which would be ideal for High School Seniors. 2. You are the minister of tourism of Jamaica, an island country. Identify the instructions you would issue to your statistics department concerning collecting data onRead MoreAugusta Resource Corporation and Their Mining Video Aimed to Support Their Project1356 Words   |  5 Pagesdamage as a minimal. This video gives a comprehensive overview of how industrialization has shaped America and the benefits this mine will bring, furthermore, it emphasizes how several national organizations have supported their plan. Through the use of ethos, this video mentioned several well known organizations such as NEPA and Mined America, has evaluated their plan, in addition, the video provides strong and believable evidences of this mine’s advantage with official data and the use of colorRead MoreEvaluate the Organization’s Involvement and Responsibility to the Community1482 Words   |  6 Pagesthat is hoped to work towards the good of any organization. Motivation and empower ment does not come from rewards to employees but instead, recognition, responsibility and advancement. Leaders who are effective in motivating and empowering their staff have acquired a great achievement, which can increase efficiency, and self development of skills and abilities. When employers are concerned about the welfare and needs of their staff, this provides trust among staff. The purpose of this paper is toRead MoreThe Fragile Relationship And Organizational Issues856 Words   |  4 Pagesrelationship and organizational issue Monitor (2014d) reported that some of trusts considered they were not fairly paid by local commissioners. As an organization in financial pressure, it is often seen that people in within believed that problems are caused externally and cannot be resolved by themselves. This idea tends to weaken the management and its leadership in short term. It was also discovered that those foundation trusts which are in poor financial status were in a deteriorating relationshipRead MoreFormalization-India Mclean. Formalization Is Characterized1459 Words   |  6 Pageshave to develop initiatives to encourage buildup of trust among employees is true. Since through this, favorable atmosphere between workers and management is created that enables efficient and effective communication (McShane Glinow, 2015). Significantly, the writer’s illustration of high level of trust among personnel and administration leads to harnessing of non-rational measures of organization is untrue. This is because, increased level of trust between workers and their managers in institutes

Hamilton’s Vision Intended for the New Government of...

In 1787, the United States of America Constitution was ratified by two-thirds of the states. The Constitution created a new government in the United States of America that was constructed around the idea of separation of power by the three branches of government with a system of checks and balances. These branches include the executive branch, the bicameral legislative branch and judicial branch. In order to ensure that no branch were to overpower the other two branches, the forefathers of the United States of America created a system of checks and balances. In the new government of the United States of America, the president had a Cabinet with a Secretary of State, Secretary of the Treasury, Secretary of War, Attorney General and†¦show more content†¦By and large, however, Alexander Hamilton’s vision for the new government of the United States of America was in the country’s best interest. Alexander Hamilton’s goal was to create a stable economy. He was concerned with the public credit of the United States of America. It was found that United States of America had debts amounting to $54 million from the Revolutionary War, $10 million of which was owed to wartime ally France and Dutch bankers. He proposed an economic plan that would solidify the economic structure of the country. Hamilton believed that the public debt assumption of all the states would be â€Å"the powerful cement of our Union† if his bond proposal that would improve the national public credit was be accepted. A bond is certificate issued by a government or company promising to pay back borrowed money at a fixed rate of interest on a specified date. He stated that all war bonds from the Revolutionary War must be paid in full at face value to those holding the bond agreements. He felt that if the repayment of war bonds was not taken solemnly or if only a fraction of the face value was paid, the government would lose the confidence and loyalty of the people. He felt it was imperative that the people confidence in the new system of government. To raise money to pay off the debts, Hamilton proposed the option of newShow MoreRelatedThe Faulty Nature of the United States Electoral College1286 Words   |  5 PagesII, Section 1 of the Constitution, the Electoral College is a system utilized in The United States of America to select the President and Vice President. This process was established by the Founding Fathers in 1787, when the Constitution was written. The original purpose of the electoral system was to ensure that those who select the leaders of this nation were the most knowledgeable and informed people that America had to offer. The electors - the elected officials that make up the Electoral CollegeRead MoreThe First Political Parties Essay2263 Words   |  10 Pagesthe need for political parties.1 However, following his presidency the public was divided with opposing opinions, each arguing the best methods to regulate the country. Ultimately, the emergence of different opinions regarding the future of the United States involving the economy, foreign relations, ‘the masses,’ and the interpretation of the Constitution, led to the two political parties of the 1790s and the critical election of 1800. Regarding the Constitution, the Federalists and Anti-federalistsRead MoreThe Revolution of 1800 Essay1683 Words   |  7 PagesJefferson to claim the presidency. However, the election of 1800 was more than just a simple presidential election. The election of 1800 was the first peaceful transfer of power from the incumbent party to the opposition and represented a new step in politics, as well as a new direction in foreign policy that would emerge from Jefferson’s policies, and to this extent, the election of 1800 was a revolution. For several reasons, Jefferson’s emergence as victor in the election of 1800 was revolutionary, politicallyRead More The American Banking System from 1800-1810 Essay example3639 Words   |  15 Pagesthough there were roughly 120 private commercial banks that had been chartered by new state governments, the so-called system was scarcely organized. It was ad hoc in nature and directly linked to the merchant banking practices of the pre-independence period. The years preceding the turn of the century were important because they brought a central banking authority onto the scene. In 1789 the new federal government established a position for the Secretary of the Treasury. As we know, the first toRead MoreAmerican Visions of Foreign Policy, 1750-19132300 Words   |  9 PagesAmerican Visions of Foreign Policy 1750-1913 Introduction The United States has been, from its inception, a country that was interested in expansion and of growing its influence abroad. The original administration, that of George Washington, contained a member of the cabinet who is said to be the progenitor of American foreign policy, Alexander Hamilton. Throughout the years others Jefferson, Quincy Adams, Polk, Teddy Roosevelt have led the country based on a vision for expansion and diplomacyRead MoreFeds vs Anti-Feds3174 Words   |  13 PagesHamilton Vs. Jefferson December 29, 2006 by Ando hamjeff.jpg I had intended to post Part II of the WWI question last night, but got caught up doing movie reviews on Life of Ando. So to slake your ravenous historical thirst in the meantime, here is my assignment from my history class this past week. If you’re really into American history and how the politics of the early Republic shook out, Jefferson vs. Hamilton is a great study. It’s also a little, I guess comforting, to know that as bad asRead MoreHow Does The Constitution Allow For Enduring Debate?1890 Words   |  8 PagesHow does The Constitution allow for enduring debate? In what ways are the early visions of Hamilton and Jefferson reflect in contemporary politics? Sofia Stepanoff Honors History 6 15 December 2014 The ratification of Articles of Confederation was approved, The Constitution was created. The founding fathers decided to create the constitution because the Articles of Confederation limited the central government too much. The Constitution was built to change. The way the constitution was builtRead MoreBoyer Dbq Teacher Guide10764 Words   |  44 PagesUsing the DBQ Practice Questions from The Enduring Vision, Sixth Edition A Teachers’ Guide Ray Soderholm Minnetonka High School Minnetonka, Minnesota Using the DBQ Practice Questions from The Enduring Vision, 6th Edition A Teachers’ Guide This guide is intended to suggest some possible ways that students may organize essays related to the document-based questions in the Advanced Placement version of The Enduring Vision, 6th Edition, and to provide teachers with some information on each includedRead MoreResources Capabilities20336 Words   |  82 Pages THE TOOLS OF STRATEGY ANALYSIS Step 2 Appraising Resources and Capabilities Step 3 Developing Strategy Implications l Developing Resources and Capabilities The Relationship between Resources and Capabilities Replicating Capabilities Developing New Capabilities Approaches to Capability Development l Summary l Self-Study Questions l Appendix: Knowledge Management and the Knowledge-based View of the Firm l Notes Introduction and Objectives In Chapter 1, I noted that the focus of strategy

A Telephone Based Wireless Remote Controller Free Essays

Abstract—A telephone based wireless system for the remote operation of the home appliances is proposed. The telephone, acting as a remote controller, generates a DTMF signal corresponding to each dialed digit which is converted to a BCD code by the Telephone interface circuit. This is given as input to the transmitter module which is then used to control various home appliances through a receiver module. We will write a custom essay sample on A Telephone Based Wireless Remote Controller or any similar topic only for you Order Now Data processing stages of the transmitter and receiver modules have been implemented using digital components, thereby avoiding possible use of conventional devices like monostable multivibrators. Due to the fully digital nature, the proposed design is less complex and hence the implementation is cost effective. I. INTRODUCTION With the advancement in science and technology, human beings have developed a tendency to make their everyday life amply luxurious with the aid of technology. This has led to the development of many sophisticated gadgets and equipments that assist them partially/fully in their daily activities. Operating all such electronic/electrical instruments in a modern house might be difficult for the elderly as well as disabled people. Our primary motivation to build a simple and low cost system which remotely operates all the home appliances stems from this point. We integrate our system with a standard telephone set so that the telephone can be used for the dual purpose of telephony and remote controller for various home appliances. The proposed system mainly consists of 3 modules, viz. , telephone interface circuit, transmitter and receiver. The transmitter module is in turn made up of a digital data processing block and a wireless (infrared) transmitter block and the eceiver module is made up of a wireless (infrared) receiver block, digital data processing block and a decoding block. In the scheme, a telephone receiver acts as a remote terminal to provide input Dual-Tone Multi-Frequency (DTMF) signals to the telephone interface circuit which converts them to corresponding 4 bit Binary Coded Decimal (BCD) codes. The transmitter generates an 8 bit frame using this BCD code to facilitate asynchronous communication . The receiver decodes the received signals after checking for any transmission errors (single bit) in the frame. These decoded bits act as control signals for the operation of home appliances. The system employs an asynchronous type of communication [1] in which the transmitter and receiver clocks are independent. The receiver clock does not have any prior information regarding the phase of the transmitter clock [2]. This leads to the problem of choosing the correct sampling instants at the receiver [3]. Hence the data is transmitted in the form of frames instead of individual bits. Each such frame consists of start bits, information bits, and stop bits [1]. This is explained in detail in the subsequent sections. When the system is idle, the data processing block of he transmitter gives constant logical high output. Since the transmitter consumes more power in transmitting logical high than logical low, the output of data processing block is negated before transmission to save power in the idle state. The receiver module also senses this and remains idle whenever the transmitter is transmitting continuous logical low. The reception of a start bit changes the state of the r eceiver from an idle to an active state. It then has to sample the remaining data bits in the frame at proper sampling instants. Most of the standard hardware schemes involve the use of monostable ultivibrators at the receiver to recover the data bits following the start bit. The monostable multivibrators commonly rely on variable components such as resistance and capacitance values, as well as they often account for a major part of the propagation delays associated with the receiver. We have extended this treatment to a fully digital design that presents more challenging tasks including a digital output feedback. Moreover, use of all digital components in the data processing stages reduces the propagation delay considerably. The complete design outline of all the modules of the roposed system is presented in Section II. Results and discussions are given in Section III. Finally, we present our conclusions in Section IV. II. DESIGN OUTLINE The block diagram of the proposed telephone based wireless remote control system is shown in Fig. 1. In the proposed system, the telephone set performs the dual functions of telephony and remotely controlling various devices. The remote control mode of the telephone can be activated by pressing ‘#’ from the keypad of the telephone. After the desired tasks are accomplished, ‘#’ should be pressed again to deactivate the control system. This is one of the functions of the telephone interface circuit, which is discussed next. A. Telephone Interface Circuit The telephone interface circuit integrates the designed system with the standard telephone system. As shown in Fig. 2, it basically performs the job of receiving the signals from the local loop and converting them to the standard digital signals in the BCD format. When any telephone button is pressed, a unique DTMF signal is produced for a short duration [4] which is converted to corresponding BCD code by a standard DTMF to BCD converter (KT-3170) [5]. The dual tone frequencies and the BCD codes associated with each dialed digit are shown in Table 1. The system remains in the idle state until ‘#’ button is pressed which sets the telephone to remote control mode. This mode remains activated until ‘#’ button is pressed again. This is realized in the hardware by using the BCD code corresponding to ‘#’ as the clock to toggle the J-K flip-flop (74112). The flip-flop output toggles whenever the ‘#’ button is pressed and this is directly used to control the mode of operation of the telephone. The DSO output of KT-3170 [5] is used to generate a start it for the system as it is logical high whenever a received tone pair has been registered and the output latch is updated. As the latched 4-bit BCD code is directly available at the output of KT-3170, it is given as such to the data processing block of the transmitter. These data bits are then processed to facilitate asynchronous communicatio n as explained below. B. Transmitter The 4-bit output of KT-3170 can not be directly transmitted as individual bits as the proposed system employs asynchronous mode of communication. The 4-bit BCD code is thus transmitted as frames for proper reception [1]. We have chosen an eight bit frame for our system which consists of a start bit followed by four data bits, a parity bit and two stop bits. Parity bit enables the system to detect any single bit error during transmission. Stop bits mark the ending of the frame. The frame is then transmitted using infrared (IR) transmitter. As shown in Fig. 2, the transmitter mainly consists of two blocks which are explained below. 1) Fully Digital Data Processing Block: This block performs the function of converting individual bits to 8-bit frames in order to carry asynchronous communication. First bit of the frame is the start bit (taken as 0) which is generated when any of the buttons is pressed. The succeeding 4 bits are the data bits (BCD code) generated by the telephone interface circuit as explained before. Next bit is taken as parity check bit generated by XORing the first 5 bits of the frame. Last 2 bits, termed as stop bits, are taken as 1. Following the generation of the start bit, the data bits are loaded in the parallel to serial converter (74165) using a D-type flip-flop (7474) and the frame is transmitted serially. 2) IR Transmitter Block: This module transmits the frames enerated in the previous section using an IR emitting diode. The data to be transmitted is modulated using Amplitude Shift Keying (ASK) with a carrier square wave of 38 kHz. The transmission range of the system is thus highly improved over the case when data is transmitted without modulation. As the data processing stage gives logical high output in the idle state, it is negated before tran smission to save power. Thus, a logical low is actually transmitted whenever the system is in idle state. C. Receiver The receiver also has 2 working states, viz. , idle and active. It remains in the idle state until it detects a start bit. It then receives the frame starting from the start bit and checks for a single bit error. If error is detected, no action is taken and the information has to be transmitted again by the user. The received data bits are then decoded which act as control signals for the operation of various appliances. As is evident from Fig. 3, receiver circuit can be subdivided into 3 blocks which are explained below. 1) IR Receiver Block: This block receives the transmitted frames and converts the signal back to Transistor Transistor Logic (TTL) levels. A standard 38 kHz IR receiver (TSOP 1738) [6] is used for this purpose. 2) Sampling Clock Generator: The main function of this block is to generate a sampling instant at approximately the middle of the transmitted bit interval. The start bit activates this block and loads counter 1 (4-bit up-counter) with value ‘0’. The clock frequency of this counter is 16 times the bit rate. When the output of this counter changes from 7 to 8, the most significant bit changes from ‘0’ to ‘1’ and this rising edge is used as the sampling instant for the data. Start bit also loads the counter 2 (4-bit down-counter) with the frame size i. e. , 8. When this reaches the value ‘0’, the whole block is disabled and is reactivated only when next start bit arrives. 3) Data Sampler and Decoder: The serial input data is sampled according to the sampling instant generated in the previous stage and is converted to parallel form using serial to parallel converter (74164). This data is then checked for any 1-bit errors by XORing the bits. If error is found, no action is taken and the data has to be retransmitted. If no errors are found, the data is decoded using 4-16 decoder (74154) and he signal is given to the appliance for the completion of the corresponding task. III. RESULTS AND DISCUSSIONS The proposed system has been fully implemented and successfully tested in the standard telephone local loop. The transmitter, kept near the telephone set, taps the DTMF signal from the local loop and transmits the corresponding data frame wirelessly . This signal is received by the receiver installed at the switch board. It decodes the data and takes the corresponding action. At least ten control signals, corresponding to each digit from 0 to 9, can be generated using a standard telephone set. The transmitter was previously implemented without a modulator where the IR LED was kept ON for transmitting logical high and OFF for transmitting logical low. This limited the distance between the transmitter and receiver to a maximum of 30 cms for proper reception. The range of the wireless system has increased to several meters after modulating the data using 38 kHz square wave. This range also depends on the current flowing through the infrared diode which has to be properly tuned to maximize the range. A standard TSOP 1738 receiver is used in the proposed ystem, which requires a minimum burst length of 10 cycles for proper detection. This puts an upper limit on the data rate supported by our system which is practically observed to be 2. 8 kbps [5]. The IR transmitter is highly directional and requires the receiver to be in line of sight of the transmitter. The reception angle of the receiver is observed to decrease with increasing distance between the transmitter and receiver. T his is because of the fact that the power is not uniformly distributed and is concentrated in narrow transmission angle. Moreover, the signal power reduces when the distance between the transmitter and the receiver is increased. So, the receiver has to be highly aligned with transmitter when operating at some substantial distance from it. This problem is of not much concern for our system because the transmitter and receiver, being static in nature, can be properly aligned at the time of installation. The data processing blocks of both the transmitter and the receiver are fully digital in nature. This comprehensively reduces the propagation delays involved and increases the rate at which data can be processed in these blocks. Though, data rate is not very important in the present application but this feature makes the design of our data processing blocks suitable for high data rate applications which are commonly seen in wired communication. IV. CONCLUSIONS A wireless system has been proposed to operate the home appliances remotely using a standard telephone set. This has been successfully tested and is found to be working satisfactorily within a distance of 10 meters. The telephone receiver performs a dual-function of telephony and remotely controlling various devices with the help of its ‘#’ button on the keypad. The telephone interface circuit is easily integrated with the standard local loop thus avoiding any changes in the telephone set. Hence, the proposed system is compatible with any type of telephone working on standard local loop. The system employs asynchronous mode of communication which avoids the need to synchronize the transmitter and receiver clocks, thus making our system less complex and hence cost effective. The proposed fully digital innovative design of the data processing blocks reduces the propagation delay and makes them useful for even high data rate applications. Moreover, the system is capable of detecting the single bit errors occuring during transmission. The proposed system can be used in a wide range of practical applications such as speed control of motors, switching of appliances, control of robots, etc. The above discussed characteristics like simple design, high practical utility and easy installation makes our system highly marketable. REFERENCES [1] Gorry Fairhurst. Asynchronous Communication [Online]. Available: http://www. erg. abdn. ac. uk/users/gorry/course/phy-pages/async. html. [2] D. Comer, Computer Networks and Internets with Internet Applications. Upper Saddle River, NJ: Prentice-Hall, 2004. [3] A. Subramanian, V. P. S. Makh and A. Mitra, â€Å"A New Digital Transceiver Circuit for Asynchronous Communication†, Enformatika Trans. , vol. 8, pp. 237-241, Oct. 2005. [4] DTMF Background [Online]. Available: http:// www. ece. utexas. edu/mason/codesign/dtmf. html. [5] Samsung Electronics Datasheet. KT3170 Low Power DTMF Receiver [Online]. Available: http://www. ortodoxism. ro/datasheets/SamsungElectronic/mXuusvq. pdf. [6] Vishay Semiconductors Datasheet. Photo Modules for PCM Remote Control Systems [Online]. Available: http://www. vishay. com/docs/82030/82030. pdf How to cite A Telephone Based Wireless Remote Controller, Essay examples

Ethical Issues in Businesses Today free essay sample

Ethical issues in businesses today There are a million ethical issues in todays businesses and unfortunately there is no perfect decision measurement for all these ethical issues in business. The ethical issues in international businesses are much more complicated and much more delicate, along with being tenfold in numbers. According to Wiley (1995), ethics is concerned with moral obligation, responsibility, and social Justice. She goes on to say that ethics reflects the character of the individual and more con temporarily per haps, the character of the business firm, which is a collection of individuals. Mauro et all, 1999) It is evident that ethics play such a crucial role in businesses if we consider the instances like the Enron companys ethical break down. Not only in Enron, but Dilemmas involving discrimination, harassment, fraud, contractual breaches, favouritism and consistent policies regarding pay, rewards and discipline are common occurrences in many organizations. (Hartel, C. We will write a custom essay sample on Ethical Issues in Businesses Today or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page E. J, Fujimoto, Y, 2010) Industry Wide Ethical Issues in Business Following is a list of industry wide ethical issues in businesses. The problem with these ethical issues in business is that they are not only really routine and frequent ut they are also more wide-spread Bribing powerful officials in order to get bids and tenders accepted and bribing competitor employees to get informational leaks is a serious ethical issue in business. In fact, it is a crime that is legally punishable in most countries today. Labor related issues like gender discrimination at workplace, employee harassment, minority community participation, working conditions and child labor are also some general ethical issues in busines

Why I Want to Visit South Korea free essay sample

With its expanding capital and traditions still deeply rooted, South Korea is a haven of serenity and modernity that will appeal to many travelers. Some reasons why i want to visit South Korea. Visit imperial palaces of exception.In Seoul and other parts of the country, Korean palaces are majestic and incredibly well preserved. Do not miss the many temples you can visit, where you can sometimes eat something or even sleep with the monks.Discover a unique and delicious gastronomySouth Korea offers very unusual dishes for us, with foods we do not have to eat: soybean soup broth, pasta flavored with cabbage (called kimchi), whole squid and much more!Enjoy an easy destinationKoreans are famous for their organization and hospitality, and not to be missed: the metro stations are well-appointed and easy to navigate even in an immense city such as Seoul. It is a very safe country to travel with total freedom; Its inhabitants will gladly help you if you do not know where to go. We will write a custom essay sample on Why I Want to Visit South Korea or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Visit Seoul: the capital that never sleepsSeoul is the reason why you should visit Korea as it is impressive: in the Myeongdong neighborhood the shop signs are always on; you can drink coffee, eat, go to a sauna or even do your shopping at any time of day or night!Bathing in JejuThe island of Jeju, located to the south, is a very quiet coastal station compared to the pace of development enjoyed by the rest of the country. Many do not know, but you can spend several days enjoying the beautiful beaches of fine sand of South Korea!Make nice excursions in the middle of a preserved nature.The calm country of the morning is composed of 70% by mountains and has many organized hiking routes, scattered throughout the country to enjoy a unique and well preserved fauna.

First Electoral College Tie - Election of 1800

First Electoral College Tie - Election of 1800 The first Electoral College tie in American political history occurred in the 1800 election, but it wasnt the two presidential candidates who were deadlocked. A presidential candidate and his own running mate received the same number of electoral votes, and the House of Representatives was forced to break the tie. The first Electoral College tie resulted in Thomas Jefferson of Virginia, a Democratic-Republican candidate, being elected president and runner-up Aaron Burr of New York, his running mate in the election, being elected vice president in 1801. The tie exposed a major flaw in the countrys new constitution, one that was corrected a short time later. How the Electoral College Tie Happened The candidates for president in the 1800 election were Jefferson and incumbent president John Adams, a Federalist. The election was a rematch of the race won by Adams four years earlier, in 1796. Jefferson won more electoral votes the second time around, though, getting 73 to Adams 65. At the time, the Constitution did not allow for electors to choose a vice president but stipulated that the second-highest vote-getter would hold that office. Instead of choosing Jefferson president and Burr vice president, the electors botched their plan and instead awarded both men 73 electoral votes. Under Article II, Section 1 of the U.S. Constitution the responsibility of breaking the tie was handed to the U.S. House of Representatives. How the Electoral College Tie Was Broken The delegation from each state in the House was given one vote to award to either Jefferson or Burr, to be decided by a majority of its members. The winner needed to get nine of the 16 votes to be elected president, and the balloting started on Feb. 6, 1801. It took 36 rounds of balloting for Jefferson to win the presidency on Feb. 17. According to the Library of Congress: Still dominated by Federalists, the sitting Congress loathed to vote for Jefferson - their partisan nemesis. For six days starting on February 11, 1801, Jefferson and Burr essentially ran against each other in the House. Votes were tallied over thirty times, yet neither man captured the necessary majority of nine states. Eventually, Federalist James A. Bayard of Delaware, under intense pressure and fearing for the future of the Union, made known his intention to break the impasse. As Delaware’s lone representative, Bayard controlled the state’s entire vote. On the thirty-sixth ballot, Bayard and other Federalists from South Carolina, Maryland, and Vermont cast blank ballots, breaking the deadlock and giving Jefferson the support of ten states, enough to win the presidency. Fixing the Constitution The Twelfth Amendment to the Constitution, ratified in 1804, made sure that electors chose presidents and vice presidents separately and that a scenario such as the one that occurred between Jefferson and Burr in 1800 would not happen again. Electoral College Tie in Modern Times There hasnt been an Electoral College tie in modern political history, but such a deadlock is certainly possible. There are 538 electoral votes at stake in every presidential election, and it is conceivable that the two major-party candidates could each win 269, forcing the House of Representatives to choose the winner. How an Electoral College Tie is Broken In modern American elections, the presidential and vice presidential candidates are joined on the ticket and elected to the office together. Voters do not select the president and vice president individually. But under the Constitution, it is possible that the presidential candidate of one party could be paired with the vice presidential candidate of the opposing party in the event the House of Representatives is called on to break an Electoral College tie. Thats because while the House would break a tie for president, the U.S. Senate gets to choose the vice president. If the two houses are controlled by different parties, they could theoretically decide on a president and vice president from different political parties.

Effective Public Administrative System Essay Example | Topics and Well Written Essays - 750 words

Effective Public Administrative System - Essay Example Organizations must ensure that their employees follow the required procedures while handling their daily duties so that negative impacts are experienced and the organization achieves its desired outcomes. The technological advancement pressures the need for expertise in every field of production, improved living conditions, and an informed decision-making. An organization for example oil-producing company must have and implement strict policies governing its operations, occupational health, and compliance to the state laws governing processing and manufacturing industries (United Nations, 2005). The state requires that such companies must conduct environmental impact assessment so that they do not cause more harm to the environment and the people living within the vicinity of the industry. The state has in place the regulations and standards a company must meet before carrying out its operations, which the management of the organization must ensure that it complies and meets them, fa ilure to which permit is denied (United Nations, 2005). Oil producing companies require employees with technical expertise in the field of engineering to undertake most of its operations. The recruiting team of the company must ensure that they follow proper ways of employing, so that they do not end up messing with their operations, which consequences are faced by the society. The required knowledge and experience as per the law must be met; employing a software engineer to undertake, direct and supervise oil mining is not practical. The United Nations (2005) indicated that administrative staff of a company must ensure that their employees undergo appropriate induction training relevant to their area of specialization before they start working independently. Laxity in development and implementation of such policies might cause mishandling materials and machines resulting into an explosion causing injuries and deaths. Health facilities are very sensitive area that requires its emplo yees, nurses and doctors, to be qualified and certified by the board. A pharmacist cannot even at one point undertake surgery. It will be going against human right and is unethical as per the work norms and regulations of the country. Deaths will be caused; therefore, the government must ensure that people who are not trained and certified should by the authorizing body do not operate a medical facility, as that is breach of law which the individual must be punished for. Nurses who serve patients impolitely do not deserve to do the jobm because the patients might get traumatized due to stress. The impact caused could have been prevented if there were strict policies and regulations (United Nations, 2005). According to United Nations (2005), corruption is a barrier towards attainment of strong and effective administration of public policies. When politics is allowed to influence the functioning of an organization, for instance, when somebody presents his or her candidate for a certai n position, the independence of the organization no longer exists. The judicial system must be independent and reforms have to be made after a period, so that weaker laws are strengthened. Relying with the old system poses more problems than good to the society. Adoption of new technology improves the performance and operations of an organization. Acquisition of equipment that detects danger and alerts the employees reduces the number of risks